Paver Sealer

At All Equipment & Pressure Supply, we stock a variety of the best paver sealing products to fit your companies needs.  Paver sealer and sand can be purchased in store or you can contact the shop for a shipping quote for a bulk order. 321-765-7725

Surface Logix Sealer Stripper

Cobble Loc is the newest technology in waterborne protection for concrete pavers, natural stone, stamped concrete, concrete surfaces and our TD One Step.

A two-part, water-based kit, Cobble Loc allows the applicator to clean and seal pavers in the same day, even on damp surfaces. Provides an enhanced, wet look appearance and semi-gloss finish like traditional solvent-based sealers, in an eco-friendly, low-VOC formulation.

Combined in a 1:1 ratio with water to create the final product, a 1 gallon kit of Cobble Loc will make up to 2 gallons of finished product and a 5 gallon kit of Cobble Loc will make up to 10 gallons of finished product. Each gallon of finished product covers approximately 200 sq. feet, depending on your surface. Unlike other clear finishes, Cobble Loc has excellent resistance to brake fluid, gasoline, bleach, and acids.

  •  Water based sealer for concrete pavers, natural stone and concrete surfaces
  • Eco-friendly and low VOCs (less than 50g/l)
  • Pressure clean and seal bricks same day
  • Same wet look and enhancement as solvent based sealers
  • Provides water and tire marking resistance
  • May be applied over damp surfaces
  • Helps lock down joint sand
  • Inhibits weed growth and anthills
  • Catalyzed product that provides chemical resistance to gasoline and oil leakage
  • Excellent paver sealer and protectant from various stains
  • Clear protective coating for concrete pavers and surfaces
  • Preserves and protects travertine, natural stone and most porous surfaces
  • Excellent top coat over Colorcrete, Coloron, and TD One Step
  • Provides chemical protection against brake fluid, gasoline, bleach and acids
  • Protects concrete tile roofs
  • Used in paver repair and maintenance
  • Applied after concrete stamps utilization to produce natural and realistic results

Cobble Strip is an eco-friendly low odor paint stripper designed to remove various types of coatings. Cobble Strip performs by penetrating and softening the paint film. Cobble Strip will remove most sealers, paints, and concrete stains, both solvent and water base.

  1. Commercial grade formulation.
  2. Easy to rinse.
  3. Eco friendly.
  4. Biodegradable.

A two-part, water-based kit, Cobble Loc allows the applicator to clean and seal pavers in the same day, even on damp surfaces. Provides an enhanced, wet look appearance and semi-gloss finish like traditional solvent-based sealers, in an eco-friendly, low-VOC formulation.

Combined in a 1:1 ratio with water to create the final product, a 1 gallon kit of Cobble Loc will make up to 2 gallons of finished product and a 5 gallon kit of Cobble Loc will make up to 10 gallons of finished product. Each gallon of finished product covers approximately 200 sq. feet, depending on your surface. Unlike other clear finishes, Cobble Loc has excellent resistance to brake fluid, gasoline, bleach, and acids.

Ure-Seal

URE-SEAL H2O – Gloss

URE-SEAL H2O Gloss is a 2-part water reducible, crystal clear Urethane. It is a high performance clear coating that can be used inside or out to protect and enhance any properly prepared concrete, pavers, or decorative concrete surface for years of service. Also available in Natural and Mid-Gloss finishes.

URE-SEAL H2O – Natural

URE-SEAL H2O Natural is a 2-part water reducible, crystal clear urethane. It is a high performance clear coating that can be used inside or out to protect any properly prepared concrete, pavers, or decorative concrete surface for years of service. Also available in Gloss and Mid-Gloss.

URE-SEAL H2O Next Gen

ICT Ure-Seal H2O Next Gen/56 is a 2-part environmentally friendly water reducible crystal clear urethane. It is a high performance clear coating that can be used inside or out to protect and enhance properly prepared concrete and concrete hardscapes surfaces for years of service. Ure-Seal H2O Next Gen/56 cleans up with sodium bicarbonate and water.

Trident

Hurricane CAT 5 is the ultimate in 2-part sealers made with a new generation urethane providing ultra-durable surface protection. Its Armor Bond joint stabilization hardens joint sand to prevent sand washout. It provides the deepest color enhancement with high-gloss finish using T3 True Tone Technology. It has an added antifungal that protects the sealer film from mold, moss and algae. Hurricane CAT 5 is a super concentrated water based film forming sealer that comes as a kit and requires mixing and dilution before use. Recommended for professional use only.

Cyclone locks in a clean, natural look with a matte finish. It will protect the surface from a variety of contaminants and makes cleaning and maintenance easier. Cyclone will harden joint sand which helps reduce sand washout, weeds and insect infestation. An added antifungal protects the sealer film from mold, moss and algae. Cyclone is a water based film forming sealer.

SEK Joint Sand

SEK Joint Sand is a clean, dry angular sand that meets ASTM C-144 specification. This type of sand is the optimal gradation for stability and ensures long term performance of the pavement system. SEK Joint Sand is ideal for use with Trident's Joint Stabilizing Sealers when a hardened joint sand is desired to prevent sand washout, insect infestation and weed growth. Available in tan, gray, platinum. black and fieldstone.

COVERAGE PER 50LB BAG
JOINT WIDTH UP TO 1/4" ∙
-50-75 square feet
JOINT WIDTH 1/4"-1/2"
∙ -25-50 square feet
JOINT WIDTH 1/2"-3/4"
∙ -15-25 square feet
Shopping Cart